Kingwell News
Product Detail

Service Tools

Product Details

MODEL “H” HYDRAULIC SETTING TOOL

Model “H” Hydraulic Setting Assembly (HST).png

The Model “H” Hydraulic Setting Assembly (HST) is a
hydraulic setting tool designed for setting packers and plugs without pipe manipulations. It is used to set packers and plugs that are normally set with a Model “E-4” Wireline Pressure Setting Assembly (or similar wireline setting equipment). The same adapter kit that is used on wireline can be used with the Model “H” HST.

The Model “H” HST and packer (or plug) is run in on the tubing to the desired setting depth and a ball is dropped to the HST. Pressure is applied to close the fill ports, which also opens the setting pistons to pressure. As pressure is applied, force is transmitted to the packer (or plug) to set. Tubing tension can also be applied to supplement the setting force generated by the pressure applied.

The standard setting tool comes with three pistons, but additional pistons can be added to reduce setting pressure.

Special Features

Large internal by-pass

Tubing fills automatically as HST is run in the hole

Premature setting is prevented by means of a shear screw in the cross link sleeve

Ported top sub permits circulation through the HST

Use existing wireline adapter kits

Product Specifications



Size

(inches)



Tool Max PSI


Max Pull (lbs)


Tool OD

(inches)

Total Effective Piston Area

(in2)

Connection

Top

Bottom

(Baker E-4)

#05

10,000

31,000

1.718

1.49

1.315 EUE

SIZE 05

#10

10,000

75,000

2.750

3.44

1.900 EUE

SIZE 10

6.88

1.900 NUE

SIZE 10

#20

6,000

120,000

3.81

13.980

2-3/8 EUE

SIZE 20

4,000

120,000

3.81

20.940

2-3/8 EUE

SIZE 20

LC HYDRAULIC SETTING TOOL

LC Hydraulic Setting Tool (HST).png

The LC Hydraulic Setting Tool (HST) is used to set packers and plugs on tubing that are normally set on wireline. This allows setting in high-angle wells or deviated wells where it is difficult to use   wireline equipment. The LC HST allows for packers and plugs to be set with a combination of hydraulic and mechanical forces. This can reduce the setting pressure needed by supplementing the set with tubing tension. A single size LC HST may be used to set a multitude of packer sizes by simply attaching the proper size LC Hydraulic Adapter Kit.

Special Features

Heavy-duty design

Multiple setting chambers for lower setting pressures

Operable in heavy mud systems

Can be equipped to operate in high temperatures

Circulation through the tool during run in

Product Specifications

Tool

Setting Area

(in2/Cylinder)

Tool OD

(inches)

Tool ID

(inches)

Thread Connection

Box Up / Pin Down

LC-15

4.70

3.718

1.50

2-7/8 EUE

LC-20

4.60

4.375

2.00

3-1/2 IF TOOL JOINT

LC-20HD

4.60

4.375

1.75

3-1/2 IF TOOL JOINT

CEMENT RETAINER

Wireline Set Cement Retainer.png     Mechanical Slip Kit.png

The Cement Retainer is a drillable packer that provides the end user with a tool that will consistently contain well pressures at elevated temperatures and pressures. This tool is designed to be used for remedial cementing operations and light service applications. This tool permits faster removal from the well with either rotary or cable tool methods due to its compact size and the selection of high quality construction materials.

Special Features

Surface controlled valve

Allows pressure testing before squeeze

Valve automatically closes when the stinger is removed, locking in the squeeze pressure

Valve protects sensitive zones in low fluid wells

Simple conversion to bridge plug

Mechanical or wireline set available Components rotationally locked for easy drillout

Product Specifications

Casing

Recommended Hole Size

(inches)

Tool OD

(inches)

Size

(inches)

Weight

(lbs/ft)

4-1/2

9.5 - 15.1

3.826 - 4.090

3.612

         5

11.5 - 18.0

4.276 - 4.560

3.937

5-1/2

14.0 - 23.0

4.670 - 5.012

4.315

6-5/8

17.0 - 32.0

5.675 - 6.135

5.375

         7

17.0 - 35.0

6.004 - 6.538

5.680

7-5/8

20.0 - 39.0

6.625 - 7.125

6.313

8-5/8

24.0 - 52.0

7.435 - 8.097

7.125

9-5/8

29.3 - 58.4

8.435 - 9.063

8.125

10-3/4

32.75 - 60.7

9.660 - 10.192

9.437

11-3/4

38.0 - 60.0

10.772 - 11.150

10.437

13-3/8

48.0 - 72.0

12.347 - 12.715

12.000


CR BRIDGE PLUG

Wireline Set Cement Retainer-1.pngMechanical Slip Kit-1.png


The CR Bridge Plug provides the end user with tools that will consistently contain well pressures at evated temperatures and pressures.   This plug permits faster removal from the well with either rotary or cable tool methods due to its

compact size and the selection of high quality construction material.


The short, compact, interlocked construction assures the user that the CR Bridge Plug will provide faster, safer run-in, dependable set and pack-off and hold pressure that is safe for the casing weight and grade. The interlock construction and compact size requires minimal material removal during drill out. The outside diameter of these products has been held to a minimum to provide maximum tool-to- casing clearance   for safe   running   and   maximum   fluid by-pass area during displacement procedures even in heavy mud systems.

A Wireline Adapter Kit (WLAK) and Hydraulic Setting Tool are used for setting CR Bridge Plugs.





NOTE: The CR Bridge Plug is designed to provide a temporary wellbore seal. For a permanent wellbore seal, cement must be set on top of the plug.

Special Features

Convertible to Cement Retainer

Sets on wireline or on tubing with mechanical setting tool

Product Specifications

Casing

Recommended

Hole Size (inches)

Tool OD

(inches)

Size

(inches)

Weight

(lbs/ft)

4-1/2

9.5 - 15.1

3.826 - 4.090

3.612

5

11.5 - 18.0

4.276 - 4.560

3.937

5-1/2

14.0 - 23.0

4.670 - 5.012

4.315

6-5/8

17.0 - 32.0

5.675 - 6.135

5.375

7

17.0 - 35.0

6.004 - 6.538

5.680

7-5/8

20.0 - 39.0

6.625 - 7.125

6.313

8-5/8

24.0 - 52.0

7.435 - 8.097

7.125

9-5/8

29.3 - 58.4

8.435 - 9.063

8.125

10-3/4

32.75 - 60.7

9.660 - 10.192

9.437

11-3/4

38.0 - 60.0

10.772 - 11.150

10.437

13-3/8

48.0 - 72.0

12.347 - 12.715

12.000

CIW BRIDGE PLUG

CIW Bridge Plug.png


The CIW Bridge Plug is designed to have excellent running characteristics and secure sets. This plug can be set on different types of Wireline Pressure Setting Tools as well as with Hydraulic Setting Tools. This plug is designed for rapid drill-out while maintaining sufficient strength during the set. It is designed for high differential pressures   and temperatures up to 250°F with standard Nitrile element and O-ring. Different elastomers are available for   higher temperatures.

The short, compact, interlocked construction assures the CIW Bridge Plug will provide faster, safer run-in, dependable set and pack-off, and hold pressure that is safe for the casing weight and grade. The interlock   construction and compact size requires minimal material removal during drill out.

Special Features

Electric, wireline or hydraulic set

Drillable, cast iron construction

One piece break-apart slips

Rubber extrusion resisting backups on elements

Sets with common setting sleeves

Locking mechanism for ease in drilling multiple plugs

Product Specifications

Casing

Recommended

Hole Size (inches)

Tool OD

(inches)

Size

(inches)

Weight

(lbs/ft)

3-1/2

7.7 - 10.2

2.922 - 3.068

2.750

4-1/2

9.5 - 15.1

3.826 - 4.090

3.613

5-1/2

13.0 - 23.0

4.670 - 5.044

4.315

            7

17.0 - 35.0

6.004 - 6.538

5.680

7-5/8

20.0 - 39.0

6.625 - 7.125

6.312

8-5/8

24.0 - 52.0

7.435 - 8.097

7.125

9-5/8

29.3 - 61.1

8.375 - 9.063

8.125

10-3/4

32.75 - 60.7

9.660 - 10.192

9.437

11-3/4

38.0 - 60.0

10.772 - 11.150

10.437

13-3/8

48.0 - 72.0

12.347 - 12.715

12.000

16

65.0 - 128.0

14.438 - 15.250

14.125

WIRELINE ADAPTER KIT - FOR CEMENT RETAINER & CR BRIDGE PLUG

Wireline Adapter Kit (WLAK) for Cement Retainers.png

The Wireline Adapter Kit (WLAK) for Cement Retainers and CR Bridge Plugs is used to set Cement Retainers and CR Bridge Plugs on electric wireline or with a hydraulic setting assembly on tubing. The WLAK is designed to be used ona Baker E-4 wireline powder charge or hydraulic setting assembly or any setting assembly with the same   configuration.

The WLAK automatically disconnects from the Bridge Plug during packer setting to be easily retrieved and prepared to run again.



Product Specifications



Size

(inches)

Tool OD

(inches)

Wireline Setting

Tool Box Up

4-1/2

3.500

BAKER E-4, #10

5-1/2

4.000

BAKER E-4, #20

           7

5.688

BAKER E-4, #20

9-5/8

8.125

BAKER E-4, #20

WIRELINE ADAPTER KIT - FOR CIW BRIDGE PLUG

Wireline Adapter Kit (WLAK) for CIW Bridge Plugs.png


The Wireline Adapter Kit (WLAK) for CIW Bridge Plugs is used to set CIW Bridge Plugs

on electric wireline or with a hydraulic setting assembly on tubing. The WLAK is designed to be used on a Baker E-4 wireline powder charge or   hydraulic setting assembly,   but   can be used with any setting assembly with the same configuration.

Product Specifications


Size

(inches)

Tool OD

(inches)

Wireline Setting Tool Box Up

3-1/2

2.600

BAKER E-4, #05

4-1/2

3.500

BAKER E-4, #10

5-1/2

4.240

BAKER E-4, #20

            7

5.250

BAKER E-4, #20

8-5/8

6.750

BAKER E-4, #20

9-5/8

7.750

BAKER E-4, #20

10-3/4

8.750

BAKER E-4, #20

11-3/4

10.200

BAKER E-4, #20

13-3/8

11.000

BAKER E-4, #20

16

13.500

BAKER E-4, #20

DLT Retrievable Packer

DLT Retrievable Packer.png

The DLT Retrievable Packer is a compression set packer with hydraulic hold down that is designed to provide an extra measure of dependability for rugged service. The hydraulic actuated upper hold-down provides more than   the   usual surface area to ensure that the packer will not move up the hole. It is ideally suited for high pressure, high temperature service work.

Some unique features of this packer include positive rotational locks on all internal connections, which allow for extreme values of torque (left-hand or right-hand) to be transmitted through the packer. Backup rings on all the o-rings   provide for more reliable sealing at high temperature and pressure.

This packer also comes with extra-long top and bottom subs which allow for hydraulic tong make-up and break out.


Special Features

Hydraulic actuated upper hold down slips

Positive rotational locks on all internal connections

Backup rings on all o-rings provide for more reliable sealing at high temperatures   and high pressures   


Available with extra-long top and bottom subs allowing hydraulic tong make-up and break out


Product Specifications

Casing

Recommended

Hole Size

(inches)

Gage OD

(inches)

Max OD

   (inches)

Tool ID

(inches)

Thread Connections Box Up / Pin Down

Size

(inches)

Weight

(lbs/ft)

        7

17.0 - 23.0

6.366 - 6.538

6.188

6.2001

2.69

3-1/2 IF TOOL JOINT

26.0 - 32.0

6.094 - 6.276

5.954

-

2.69

3-1/2 IF TOOL JOINT

32.0 - 38.0

5.920 - 6.094

5.781

-

2.69

3-1/2 IF TOOL JOINT

38.0 - 46.4

5.626 - 5.920

5.525

-

2.69

3-1/2 IF TOOL JOINT

7-5/8

24.0 - 29.7

6.875 - 7.025

6.672

-

2.69

3-1/2 IF TOOL JOINT

33.7 - 39.0

6.625 - 6.765

6.453

-

2.69

3-1/2 IF TOOL JOINT

9-5/8

32.3 - 43.5

8.755 - 9.001

8.584

-

3.75

4-1/2 IF TOOL JOINT

43.5 - 53.5

8.535 - 8.755

8.365

-

3.75

4-1/2 IF TOOL JOINT

58.4 - 59.4

8.407 - 8.435

8.250

-

3.75

4-1/2 IF TOOL JOINT

10-3/4

51.0 - 55.5

9.760 - 9.850

9.500

-

3.75

4-1/2 IF TOOL JOINT

60.7 - 65.7

9.560 - 9.660

9.375

-

3.75

4-1/2 IF TOOL JOINT

71.1 - 73.2

9.406 - 9.450

9.125

-

3.75

4-1/2 IF TOOL JOINT

11-3/4

42.0 - 54.0

10.880 - 11.084

10.625

-

3.75

4-1/2 IF TOOL JOINT

60.0 - 71.0

10.586 - 10.772

10.406

-

3.75

4-1/2 IF TOOL JOINT

13-3/8

48.0 - 77.0

12.275 - 12.715

12.000

-

3.75

4-1/2 IF TOOL JOINT

80.7 - 92.0

12.031 - 12.215

11.750

-

3.75

4-1/2 IF TOOL JOINT

14

82.5 - 92.68

12.700 - 12.876

12.500

-

3.75

4-1/2 IF TOOL JOINT


V-III UNLOADER

V-III Unloader.png

The V-III Unloader is designed as a high-pressure accessory for the DLT Retrievable Packer designed to withstand severe operating conditions.   This unloader provides a means of equalizing tubing and annulus pressures as well as a by-pass to allow fluid to pass through the mandrel of   the packer while running the tubing string in and out of the well. Circulating can be established to spot fluids to the packer or circulating debris from the hole.


Special Features

Standard slot locks in open and closed positions

Standard slot is right-hand close, right-hand open

Additional J-slot arrangements available

Product Specifications

Size

(inches)

Tool OD

(inches)

Tool ID

(inches)

Thread Connections

Box Up / Pin Down

3-1/2

5.500

2.69

3-1/2 IF TOOL JOINT

4-1/2

7.250

3.75

4-1/2 IF TOOL JOINT



STORM VALVE

Storm Valve.png

The Storm Valve is designed to run above a compression set packer similar to the DLT Retrievable Packer. The Storm Valve allows the drill pipe or tubing close to the surface to be disconnected without tripping the entire string. It is designed to be used in situations where the rig must be abandoned quickly. It can also be used for changing surface equipment without tripping a drill string. And it will remain closed to provide a secure seal until the drill pipe or tubing is re-connected.


Special Features

Rugged, field proven design

Pump-out plug allows full access for wireline and circulation

Automatic valve operation during disconnect and reconnect operations

Product Specifications

Size

(inches)

Tool OD

(inches)

Tool ID

(inches)

Thread Connections

Box Up / Pin Down

4-3/4

5.469

1.50

3-1/2 IF TOOL JOINT

6-1/8

6.125

2.00

4-1/2 IF TOOL JOINT


BUMPER SUB

Bumper Sub.png

The Bumper Sub is a heavy duty travel joint that is designed to transmit high torque. A hex-shaped mandrel is incor- porated in the tool design   providing   a large contact surface which transmits the torque through the tool. Proven bonded seals are used to provide a seal across the full   stroke of the bumper sub.

Special Features

Heavy duty design

Large contact surfaces to transmit high torque thru tool

Bonded seals provide seal on full stroke

Other extended lengths available

Product Specifications

Size

(inches)

Tool OD

(inches)

Tool ID

(inches)

Thread Connections

Box Up / Pin Down

3-1/2

4.750

2.50

3-1/2 IF TOOL JOINT

4-1/2

6.250

3.75

4-1/2 IF TOOL JOINT

6.500

3.75

4-1/2 IF TOOL JOINT




RR SAFETY JOINT

RR Safety Joint.png

The RR Safety Joint is a means for backing off a workstring from tools below. Right-hand rotation   and recip- rocation is needed to back off the release mechanism. Shear screws hold the mandrel locked until a straight pull shears the screws. This insures the back-off mechanism does not operate until needed.


Special Features

Shear release to eliminate premature back-off

Heavy duty construction

Product Specifications


Size

(inches)

Tool OD

(inches)

Tool ID

(inches)

Thread Connections

Box Up / Pin Down

2-3/8

3.250

1.88

2-3/8 EUE

2-7/8

4.500

2.50

2-7/8 EUE

3-1/2

5.250

2.69

3-1/2 IF TOOL JOINT

4-1/2

6.250

3.75

4-1/2 IF TOOL JOINT

AXIAL INSTALLATION HD PACKER

Axial Installation (AI) HD Packer.png


The Axial Installation (AI) HD Packer is a heavy-duty service packer ideally suited for all types of squeeze cementing,   formation fracturing,   high pressure acidizing, etc. It is a large opening compression set packer   with   hydraulic   button-type hold down. It is set and unset with simple up and down motion. This motion is controlled with a   continuous J-slot so multiple settings are possible. This packer withstands high pressure from above or below   and uses a 3-element packing system, J-slot, and a drag block mechanism for easy setting. The packer has a built-in unloader which circulates across the hold down buttons to improve retrievability and run in performance.

Special Features

Heavy duty design

No rotation at surface

Built-in unloader

Product Specifications

Casing

Recommended Hole Size

(inches)

Tool OD

(inches)

Tool ID

(inches)

Thread Connections Box Up / Pin Down

Size

(inches)

Weight

(lbs/ft)

5-1/2

14.0 - 20.0

4.778 - 5.012

4.625

2.00

2-3/8 EUE

20.0 - 23.0

4.670 - 4.778

4.500

2.00

2-3/8 EUE

6-5/8

24.0 - 32.0

5.675 - 5.921

5.500

2.50

2-7/8 EUE




WR BRIDGE PLUG

WR Bridge Plug.png

The WR Bridge Plug is a wireline set, wireline retrieve, packer-type bridge plug capable of holding differential   pressure   from above or below. The WR Bridge Plug is used as a temporary bridge plug for acidizing, fracturing,   cementing, casing pressure tests, wellhead replacement, and zone isolation. The WR Bridge Plug utilizes standard wireline or hydraulic setting tools.

Special Features


Wireline set/ wireline retrieve

10,000 psi differential pressure rating above and below the plug

Bi-directional slips

Equalization feature prevents premature release against differential pressure

Product Specifications


Casing

Recommended

Hole Size

(inches)

Tool OD

(inches)


Top Connection

WLAK

Retrieving Tool

Size

(inches)

Weight

(lbs/ft)

3-1/2

7.7-10.2

2.922-3.068

2.700

5/8-18

UNF PIN

73535-05

73535RT

     4

9.5-11.0

3.476-3.548

3.250

5/8-18

UNF PIN

73535-05

73540RT

10.46-12.95

3.340-3.476

3.187

5/8-18

UNF PIN

73535-05

73540RT

4-1/2

9.5-13.5

3.920-4.090

3.750

1.000-8

UNC PIN

73545-10

73545RT

13.5-15.1

3.826-3.920

3.650

1.000-8

UNC PIN

73545-10

73545RT

15.1-16.6

3.754-3.826

3.625

1.000-8

UNC PIN

73545-10

73545RT

     5

11.5-15.0

4.408-4.560

4.125

1.000-8

UNC PIN

73545-10

73545RT

18.0-21.0

4.154-4.276

3.969

1.000-8

UNC PIN

73545-10

73545RT

5-1/2

13.0-20.0

4.778-5.156

4.625

7/8-14

UNF PIN

73557-20

73557RT

20.0-23.0

4.670-4.778

4.500

7/8-14

UNF PIN

73557-20

73557RT

23.0-26.0

4.548-4.670

4.406

7/8-14

UNF PIN

73554-20

73554RT

      7

17.0-26.0

6.276-6.538

5.969

7/8-14

UNF PIN

73570-20

73570RT

26.0-32.0

6.094-6.276

5.875

7/8-14

UNF PIN

73570-20

73570RT

COMPRESSION UNLOADER

Compression Unloader.png

The Compression Unloader is designed as a high-pressure accessory for compression set packers.   The Unloader is run above the packer pinned   in the open or closed position. After the packer is run to setting depth, the procedures required to set the packer will automatically close the unloader. With the packer set and the unloader closed, well operations may proceed.


When run above a compression set packer, the Compression Unloader is opened to allow differential pressure to equalize before releasing the packer below.

Special Features

The Compression Unloader can be pinned in the open or closed position

Allows equalizing of tubing/annulus pressure differential

When pinned in the open position, allows for fluid bypass through the ID of the packer to reduce swabbing of packer elements

Product Specifications


Casing

Tool OD

(inches)

  Tool ID

  (inches)

Thread Connections Box Up / Pin Down

Size

(inches)

4-1/2

3.500

2.00

2-3/8 EUE

         7

5.500

2.867

3-1/2 EUE

LATCH LOCATOR - FOR CEMENT RETAINER

The Latch Locator for Cement Retainer is designed to be run on tubing and is used to manipulate the Cement Retainer collet (a.k.a. sleeve valve) during cementing operations. The Latch Locator is designed with a latching mechanism to aid in maintaining connection between the Latch Locator and the Cement Retainer and to give a positive indication of release when removing the Latch Locator from the Cement Retainer.

Product Specifications

            Size

(inches)

            Tool OD

(inches)

Thread Connection

Box Up

4-1/2

3.48

2-3/8 EUE

5-1/2

4.29

2-3/8 EUE

             7

5.648

2-7/8 EUE

9-5/8

8.09

2-7/8 EUE

13-3/8

11.737

2-7/8 EUE






Kingwell Oilfield Machinery
Mr. Jerry Wang    CEO
Mobile / whatsApp: +86 18729329559
Email: kingwell@kingwelloilfield.com

Tel: 86+029-8860 1839
Fax: 86+029-8860 1839
Skype: xakingwell
Address: No.18 Fenghui South Road, Hi- tech Zone, Xi'an, China.
Ms.Yu
Int'l Sales Manager  PIC of Int'l Trade dept.
Cellphone/whatsApp: +86 13772083276
Email: Marketing@kingwelloilfield.com

Catherine Li
Marketing Manager
Cellphone/whatsApp: 0086 13379186892
Email: salesdst@kingwelloilfield.com
Linda
Business Development Manager
Mobile / whatsApp: +86 13379187081
Email: linda@kingwelloilfield.com

Grace  
in Charge of Perforating Material Dept.
Email: drilling@kingwelloilfield.com
Office Tel: 0086 88601839