Global Service Hotline +86-18729329559
Metal Dissolvable Bridgeplug
Product Parameters
Product Parameters
Description
Features
Better dissolution and pressure holding performance with metal seal.
Accurate Dissolution Times Based on Salinity and Temperature Variables
Better pump-down ability with compact design
Large Bore Size – Resulting in Higher Flow Back and Faster Dissolution
Ultra-short length, 60% shorter
Compact Tool Length of 8” Results in Faster Dissolution and Less Material
Pressure rating up to 10,000 psi
Sets with Standard Baker 10 or Baker 20 Setting Tool
| Liner Data | ||
| Liner OD | 127 | mm |
| Liner wall thickness | 9.2 | mm |
| Metal grade | N-80 | |
| Liner ID | 108.6 | mm |
| Liner Hanger Depth | 3755 | m |
| Frac Data | ||
| Maximum well pressure (surface) | 10000 | psi |
| Completion Plug Data | ||
| The installation stage of the packer | After Frac Job | |
| The type of liquid during the installation of the packer tube | Fresh Water | |
| Formation Tempreture | 104 | °С |
| Formation Pressure | 32.7 | Mpa |
| Expected pressure at the wellhead | Mpa | |
| H2S content in the well | % | |
| Number of days that plug can withhold the pressure of 70 Mpa or 35 MPa for | not less than 30 | days |
| Full dissolution of the plug | not longer than 90 | days |
| Chloride content in formation fluid | 3 | % |
| Type of kill fluid to create an additional safety barrier | CaCl | |
| The maximum permissible density of the kill fluid (safety barrier above the plug) | 1.25 | g/cm3 |
