Global Service Hotline +86-18729329559
kingwell@kingwelloilfield.com
Non Magnet
Non magnetic Integral blade stabilizer Non magnetic Drill collar Non Magnetic Pup Joints API Non magnetic Drill Pipe Pup Joints Non Magnetic Compressive Drill Pipe
View More
Bridge plug
Drillable bridge plug Wireline Retrievable Bridge Plug Dissolvable Frac Plug Ceramic rupture disk Retrievable Bridge Plug Frac Plug Super Expansion Dissolvable Plug Cast Iron Bridge Plug Metal Dissolvable Bridgeplug
  • Dissolvable Frac Plug
    Dissolvable Frac PlugBrief Introduction of Dissolvable Frac Plug Performance1. The ultra short and l...
  • Ceramic rupture disk
    Rupture disks are used to provide well control in temporary wellbore isolation applications such as ...
  • Retrievable Bridge Plug
    The KWTS-U Bridge Plug is a mechanical, retrievable, compression or tension-set Bridge Plug. This pl...
  • Frac Plug
    The product is designed and manufactured based on "dissolvable" material, and it can degra...
View More
completion tools
RTTS_PACKER_Cement Retainer_Mechanical Set Rubber Seals 15K Super Safety Valve KW Storm Valve R3 double grip retrievable casing packer Rig tool SSW40 Tool Accessories RETRIEVABLE PACKER Service Tools Permanent Packers
View More
Drilling Equipment
Retrievable Whipstock Pup Joint FLOAT_VALVE_ASSEMBLY Fishing tools Filter sub and Filter screen drilling tools _Drill Pipe(drill rod)_KW-DT-031 Drill pipe Screens Downhole tools_Kelly_Kelly drive downhole tools_Hole Opener_PDC Hole Openers Drilling Jar_SMITH Double-Acting Hydraulic Drilling Jar
  • Retrievable Whipstock
    Retrievable whipstock is the key tools in branch well drilling technologies. It plays a vital role f...
  • Pup Joint
    Pup joint is short pipe length usually with threaded ends, and is used to adjust the length of the c...
  • FLOAT_VALVE_ASSEMBLY
    1R MODEL “F” FLOAT VALVE ASSEMBLY1F-2R MODEL “F” FLOAT VALVE ASSEMBLY1F-2R MODEL “G” FLOAT VALVE ASS...
  • Fishing tools
    Product Details3OVER SHOT3.1Complete 4" OD Series 150, S.H Type Overshot , 2-5/8" Max .Catch Size ...
View More
Solid Control
Drilling Mud Solids Control System_Skid mounted SCS Drilling Mud Solids Control Equipment_Vacuum Degasser Drilling Mud Solids Control Equipment_Steel-and-Wood Foundation Drilling Mud Solids Control Equipment_Slurry Pump Drilling Mud Solids Control Equipment_Shear Pump Drilling Mud Solids Control Equipment_Shale Shaker_ Duplex Shale Shaker_SCE09 Drilling Mud Solids Control Equipment_Mud Gun Drilling Mud Solids Control Equipment_Mud Gas Separator Drilling Mud Solids Control Equipment_Mud Desilter Drilling Mud Solids Control Equipment_Mud Desander
View More
slickline Tools
Special Purpose Tools Running And Shifting Tools Pulling Tools Primary Tools Pressure Gauge Auxiliary Tools Auxiliary Tools
  • Special Purpose Tools
    The Wirefinder is a wireline tool designed to locate and ball the end of the wireline in thewellbore...
  • Running And Shifting Tools
    The B Type Self Releasing Positioning Tool is designed to selectively locate and position mostslidin...
  • Pulling Tools
    The GO Type Fishing Socket is designed primarily to extract prongs with fishing necks fromsubsurface...
  • Primary Tools
    Pear drop type rope sockets are used to securely attach wireline to the tool string.It utilises a br...
View More
APR Drill Stem Testing Tools
Surface well testing unit Rupture Disc for RD Safety Circulating Valve Pressure_Test_Pump Fullbore DST string intelligent remote implementation system Drill Stem Testing Tools Tubing String Testing (TST) Valve with ball Dual Action Ball Valve 5" 15000psi
  • Pressure_Test_Pump
    Product DetailsPressure Test Pump - 20000 PSI1. Air drive pressure：8bar2. Recorder power supply：220V...
  • Fullbore DST string
    Product DetailsFullbore DSTNoItemDescription1down hole tester valveannulus operated, capable of hold...
View More
Cased Hole Logging Equipment
Multifunction_Ultrasonic_Imaging_Logging_Tool CHLE_Memory System_Multi-finger Imaging Tool (40-finger) CHLE_Memory System_Memory Control Module CHLE_Memory System_Electromagnetic Thickness Tool (EMT02) CHLE_Memory System_Downhole Memory Cartridge CHLE_Free Point Indicating Tool_Anchoring Cartridge (FAC01)
View More
Damping tools
Damping tools
  • Damping tools
    Abstract：Anti-Vibration tool is a future bright star in metal industry which bring an effective solu...
View More
completion tools
1

Mechanical Set Packers-1

The D-H Tension Packer is for use in water flood, injection or producing wells. This tension packer has a built-in safety system to eliminate proble
Download Pdf

Product Parameters

Product Parameters

D-H TENSION PACKER

D-H Tension Packer.png

The D-H Tension Packer is for use in water flood, injection or producing wells. This tension packer has a built-in safety system   to eliminate problems should conventional retrieval methods fail. Right-hand rotation releases the first safety joint allowing   the slips to pull off the cone and release the packer. Should the packer fail to release, a second safety joint can be broken to release the packer. This safety feature allows for circulation down the tubing to remove debris.

In addition, the D-H Tension Packer is available for open-hole applications and incorporates dual elongated packing elements   and deep wickered slips for better bite into the formation.

Special Features

Full opening

Built-in safety joint

Stainless steel drag springs

Available to set in open hole

Long packing element to give maximum sealing area

Product Specifications

Casing

                 Recommended

             Hole Size (inches)



Tool OD

(inches)



Tool ID

(inches)



Thread Connections

Box Up / Pin Down

Size

(inches)

Weight

(lbs/ft)

2-7/8

6.4 - 6.5

2.375 - 2.441

       2.250

0.75

1.900 EUE

4-1/2

9.5 - 13.5

3.920 - 4.090

      3.750

1.94

2-3/8 EUE

5

11.5 - 15.0

4.408 - 4.560

       4.125

1.94

2-3/8 EUE

15.0 - 20.8

4.156 - 4.408

        4.000

1.94

2-3/8 EUE



5-1/2

13.0 - 20.0

4.778 - 5.044

4.625

1.94

2-3/8 EUE

2.44

2-7/8 EUE

20.0 - 23.0

4.670 - 4.778

4.500

1.94

2-3/8 EUE

2.44

2-7/8 EUE

6

15.0 - 20.0

5.352 - 5.524

        5.188

2.44

2-7/8 EUE

6-5/8

24.0 - 32.0

5.675 - 5.921

        5.500

2.44

2-7/8 EUE

7

17.0 - 29.0

6.184 - 6.538

6.000

2.44

2-7/8 EUE

3.00

3-1/2 EUE

7-5/8

20.0 - 33.7

6.765 - 7.125

6.625

2.44

2-7/8 EUE

3.00

3-1/2 EUE

8-5/8

24.0 - 40.0

7.725 - 8.097

7.500

2.50

2-7/8 EUE

3.00

3-1/2 EUE

9-5/8

29.3 - 43.5

8.755 - 9.063

8.500

2.50

2-7/8 EUE

3.00

3-1/2 EUE

10-3/4

32.75 - 55.5

9.760 - 10.192

      9.500

3.00

3-1/2 EUE

13-3/8

48.0 - 72.0

12.347 - 12.715

      12.000

3.00

3-1/2 EUE


D-H Tension Open Hole Packer Product Specifications


   Casing Size

     (inches)

Recommended Hole Size

(inches)

Tool OD

(inches)

   Tool ID

(inches)

Thread Connections

Box Up / Pin Down

4-1/2

3.920 - 4.090

3.750

1.94

2-3/8 EUE

         5

4.276 - 4.560

4.125

1.94

2-3/8 EUE

5 1/2

4.670 - 4.778

4.500

1.94

2-3/8 EUE

2.44

2-7/8 EUE

4.778 - 5.044

4.625

1.94

2-3/8 EUE

2.50

2-7/8 EUE

           6

5.000 - 6.220

4.875

1.94

2-3/8 EUE

6-5/8

5.675 - 5.921

5.500

2.50

2-7/8 EUE

           7

6.094 - 6.135

5.750

2.00

2-3/8 EUE

2.50

2-7/8 EUE

6.184 - 6.538

6.000

2.00

2-3/8 EUE

2.50

2-7/8 EUE

3.00

3-1/2 EUE

7-5/8

6.765 - 7.125

6.625

2.44

2-7/8 EUE

3.00

3-1/2 EUE

8-5/8

7.725 - 8.097

7.500

2.50

2-7/8 EUE

3.00

3-1/2 EUE

9-5/8

8.755 - 9.063

8.500

2.50

2-7/8 EUE

3.00

3-1/2 EUE

10-3/4

9.760 - 10.050

9.500

3.00

3-1/2 EUE

13-3/8

12.347 - 12.715

12.000

3.00

3-1/2 EUE

KW TENSION & DL SHEAR TENSION PACKER

DL Tension Packer and DL Shear Tension Packer.png


The KW Tension Packer and KW Shear Tension Packer are economical, compact tools for injection, pumping, medium range treating and production applications. These packers are set by 1/4 right-hand rotation of the tubing and then pull tension. To release these packers, slack off the tubing and the packer will automatically re-jay into the release position. These packers have a right-hand rotation release allowing retrieval of the tubing string.


The KW Tension Packer can be run in tension or compression. When the KW Tension Packer is run in compression, the right-hand release option cannot be utilized.


The KW Shear Tension Packer features an adjustable straight pull safety shear release. This packer is not designed to be run in compression.


Special Features

Long element for increased pack-off

Rotational safety tubing release

Safety shear release (KW Shear Tension Packer Only)

Deep wickered slips

Product Specifications

Casing

Recommended

Hole Size

(inches)


Tool OD

(inches)


Tool ID

(inches)


Thread Connections Box Up / Pin Down

Size

(inches)

Weight

(lbs/ft)


2-7/8


6.4 - 6.5


2.375 - 2.441


2.250

0.75

3/4” LINE PIPE / 1.315 NUE

1.13

1.315 EUE


3-1/2

7.7 - 10.2

2.922 - 3.068

2.781

1.50

1.900 EUE

12.8

2.764

2.437

1.25

1.900 EUE / 1.900 NUE



     4


9.5 - 11.0


3.476 - 3.548


3.250

1.50

2-3/8 EUE

1.88

2-3/8 EUE

14.8

3.240

3.090

1.50

1.900 EUE



4-1/2

9.5 - 13.5

3.920 - 4.090

3.750

1.94

2-3/8 EUE

12.6

3.958

3.187

1.50

2-3/8 EUE

15.1

3.826

3.656

1.94

2-3/8 EUE

15.1 - 16.6

3.754 - 3.826

3.500

1.94

2-3/8 EUE

      5

11.5 - 18.0

4.276 - 4.560

4.125

1.94

2-3/8 EUE



KW Tension & KW Shear Tension Packer Product Specifications (continued)

Casing

Recommended

Hole Size

(inches)

       Tool OD

        (inches)

Tool ID

(inches)

Thread Connections Box Up / Pin Down

Size

(inches)

Weight

(lbs/ft)


5-1/2

13.0 - 20.0

4.778 - 5.044

4.625

1.94

2-3/8 EUE

2.44

2-7/8 EUE

20.0 - 23.0

4.670 - 4.778

4.500

1.94

2-3/8 EUE

2.44

2-7/8 EUE

      6

15.0 - 20.0

5.352 - 5.524

5.125

2.44

2-7/8 EUE

20.0 - 23.0

5.240 - 5.352

5.000

2.44

2-7/8 EUE

6-5/8

17.0 - 24.0

5.921 - 6.135

5.750

2.44

2-7/8 EUE

20.0 - 28.0

5.791 - 6.049

5.625

2.44

2-7/8 EUE

24.0 - 32.0

5.675 - 5.921

5.500

2.44

2-7/8 EUE

     7

17.0 - 29.0

6.184 - 6.538

6.000

2.44

2-7/8 EUE

3.00

3-1/2 EUE

7-5/8

20.0 - 33.7

6.765 - 7.125

6.625

2.44

2-7/8 EUE

3.00

3-1/2 EUE

8-5/8

20.0 - 28.0

8.017 - 8.191

7.750

2.50

2-7/8 EUE

3.00

3-1/2 EUE

24.0 - 40.0

7.725 - 8.097

7.500

2.50

2-7/8 EUE

3.00

3-1/2 EUE

9-5/8

32.3 - 43.5

8.755 - 9.001

8.500

2.50

2-7/8 EUE

3.00

3-1/2 EUE

4.00

4-1/2 LTC

43.5 - 53.5

8.535 - 8.755

8.250

2.50

2-7/8 EUE

3.00

3-1/2 EUE

4.00

4-1/2 LTC

   10-3/4

32.75 - 55.5

9.760 - 10.192

9.500

4.00

4-1/2 EUE

   11-3/4

38.0 - 66.7

10.656 - 11.150

10.375

2.50

2-7/8 EUE

   12-3/4

43.0 - 65.42

11.750 - 12.130

11.590

4.00

4-1/2 EUE

   13-3/8

48.0 - 72.0

12.347 - 12.715

12.000

4.00

4-1/2 EUE


CASING PACKER

Casing Packer.png


The Casing Packer is a large bore, single grip packer used to isolate damaged casing and for production or injection. This packer can be run in tension or compression and can be used as a liner hanger when equipped with a right-hand release sub. Coarse, deep wickered slips allow this packer to set in open-hole or scaly casing. For open-hole set, this packer can be equipped with two elongated packing elements to assure a positive seal.


Special Features

Set/run in tension or compression

Applicable for set in open hole

Can be used as a liner hanger

Full opening

Coarse, deep wickered slip teeth

Available with right-hand or left-hand set, manual or automatic release

Product Specifications

             Casing

Recommended

Hole Size

(inches)


Tool OD

(inches)


Tool ID

(inches)


Thread Connections Box Up / Box Down

Size

(inches)

Weight (lbs/ft)

4-1/2

9.5 - 13.5

3.920 - 4.090

3.750

2.50

2-7/8 EUE

15.1

3.826

3.656

2.50

2-7/8 EUE

      5

11.5 - 20.3

4.184 - 4.560

4.000

2.50

2-7/8 EUE

18.0 - 21.4

4.126 - 4.276

3.875

2.50

2-7/8 EUE

5-1/2

13.0 - 17.0

4.892 - 5.044

4.650

3.50

4” NUE

13.0 - 20.0

4.778 - 5.044

4.625

3.00

3-1/2 EUE

5-3/4

14.0 - 17.0

5.190 - 5.290

4.875

3.50

4-1/2 EUE

      6

18.0 - 23.0

5.240 - 5.424

5.000

3.50

4” NUE

6-5/8

20.0 - 28.0

5.791 - 6.049

5.625

4.00

4-1/2 LTC


        7

17.0 - 26.0

6.276 - 6.538

6.000

4.75

5-1/2 LTC

17.0 - 38.0

5.920 - 6.538

5.750

4.00

4-1/2 LTC

20.0 - 29.0

6.184 - 6.456

5.969

4.50

5” LTC

7-5/8

20.0 - 33.7

6.765 - 7.125

6.500

4.00

4-1/2 LTC

5.00

5-1/2 LTC



8-5/8

24.0 - 36.0

7.825 - 8.097

7.656

6.00

6-5/8 LTC

6.50

7” LTC

24.0 - 40.0

7.725 - 8.097

7.500

4.15

4-1/2 LTC

5.00

5-1/2 LTC

9-5/8

32.3 - 43.5

8.755 - 9.001

8.500

6.50

7” LTC

43.5 - 53.5

8.535 - 8.755

8.250

6.50

7” LTC

10-3/4

32.75 - 55.5

     9.760 - 10.192

9.500

6.50

7” LTC

11-3/4

42.0 - 65.0

    10.682 - 11.084

10.500

8.00

8-5/8 LTC

13-3/8

48.0 - 77.0

    12.275 - 12.715

12.000

8.75

9-5/8 LTC

18-5/8

87.5 - 117.5

    17.439 - 17.755

17.000

12.50

13-3/8 STC



GV CUP PACKER

2 Cup Version.png                        4 Cup Version.png

The Type GV Cup Packer is an economical means of isolating casing leaks and depleted zones and is also a production or injection packer for low pressure applications. Depending on application, this packer can be run with cups opposed or in the same direction. This packer is also available with packing element back-up rings for higher pressure applications and comes in a full range of tubing and casing sizes in two-cup or four-cup models.


Special Features

Economic design

Cup direction option

Tubing size options


Product Specifications


               

                   Casing

Recommended Hole Size

(inches)

Tool OD

(inches)

Tool ID (inches)

Thread Connections Box Up / Pin Down

Size

(inches)

Weight

(lbs/ft)

   3-1/2

9.2 - 10.3

2.922 - 2.992

    2.810

1.50

1.900 NUE

4-1/2

9.5 - 13.5

3.920 - 4.090

3.750

2.00

2-3/8 EUE



2.50

2-7/8 EUE

15.1

3.826

3.650

2.00

2-3/8 EUE

       5

13.0 - 15.0

4.408 - 4.494

4.250

2.00

2-3/8 EUE


18.0

4.276

4.130

2.00

2-3/8 EUE

      5-1/2

13.0 - 20.0

4.778 - 5.044

4.625

3.00

3-1/2 EUE

14.0 - 20.0

4.778 - 5.012

4.625

2.50

2-7/8 EUE

17.0 - 20.0

4.778 - 4.892

4.625

2.00

2-3/8 EUE

20.0 - 26.0

4.548 - 4.778

4.375

2.50

2-7/8 EUE

6-5/8

20.0

6.049

5.750

3.00

3-1/2 EUE

20.0 - 24.0

5.921 - 6.049

5.750

4.00

4-1/2 EUE

     


        7

17.0 - 29.0

   6.184 - 6.538

6.000

2.50

2-7/8 EUE

3.00

3-1/2 EUE

20.0 - 29.0

   

    6.184 - 6.456

6.000

2.00

2-3/8 EUE

4.00

4-1/2 LTC

7-5/8

24.0 - 26.4

6.969 - 7.025

6.750

2.50

2-7/8 EUE

29.7 - 33.7

6.765 - 6.875

6.375

2.50

2-7/8 EUE

   8-5/8

28.0 - 36.0

7.825 - 8.017

7.375

2.50

2-7/8 EUE

   9-5/8

40.0 - 47.0

8.681 - 8.835

8.450

3.00

3-1/2 EUE

   10-3/4

40.5 - 55.5

9.760 - 10.050

9.710

4.00

4-1/2 LTC



GAS VENT PUMPING PACKER

Standard.png                         4 Cup Version-1.png

The Gas Vent Pumping Packer offers an inexpensive option for isolating casing leaks or depleted perforations in pumping wells. This tool prevents gas lock by allowing gas to vent to the surface past damaged zones. The interval between top and bottom cups can be any length. This packer is available with double or multiple cups.

Special Features

Inexpensive alternative to squeeze job

Variable intervals easily adjusted

Optional double cups to multiple cups

Product Specifications

Casing


     Liner Size

      (inches)


Tubing Size

(inches)


Tool OD

(inches)


Tool ID

(inches)

Size

(inches)

Weight

(lbs/ft)

       4-1/2

9.5 - 13.5

3” Line Pipe

2-3/8

3.813

2.69

      5-1/2

13.0 - 20.0

3” Line Pipe

2-3/8

4.000

2.75

3-1/2” Line Pipe

2-7/8

4.630

3.13

            7

20.0 - 29.0

4-1/2” LTC

2-3/8

5.000

2.75

2-7/8

5.000

3.13


RETRIEVABLE SEAL BORE PACKER - SINGLE BORE

Retrievable Seal Bore (RSB) Packer.png


The Retrievable Seal Bore (RSB) Packer delivers high performance with simplicity of design and desirable economics. This packer is rated for 7,000 PSI and can be equipped to withstand severe corrosion and high temperatures. The RSB Packer is set on wireline (with minor changes) or on tubing with a hydraulic setting tool and is retrieved using a retrieving tool.

NOTE: A retrieving tool is required to retrieve these packers and must be purchased separately.


Special Features

Simple operation

Economical

Easy to retrieve

Many applications

Easily modified for a wide range of conditions and temperatures

Product Specifications


                  Casing

Recommended Hole Size (inches)


Tool OD

(inches)

Packer Bore

(inches)

Min ID Thru Seals (inches)

Size

(inches)

Weight (lbs/ft)

5

15.0 - 18.0

4.276 - 4.408

4.000

2.688

1.940

5-1/2

13.0 - 20.0

4.778 - 5.044

4.625

2.688

1.940

3.000

2.380

    6-5/8

20.0 - 32.0

5.675 - 6.049

5.468

3.250

2.410





7

17.0 - 20.0

6.456 - 6.538

6.125

3.000

2.380

4.000

3.000


23.0 - 29.0


6.184 - 6.366


5.938

3.000

2.380

3.250

2.420

4.000

3.000

32.0 - 35.0

6.004 - 6.094

5.812

3.000

2.380

4.000

3.000

7-5/8

33.7 - 39.0

6.625 - 6.765

6.375

3.000

2.380

4.000

3.000



8-5/8

24.0 - 40.0

7.725 - 8.097

7.500

4.000

3.000

4.750

4.000

40.0 - 49.0

7.511 - 7.725

7.312

4.000

3.000

4.750

4.000


9-5/8

40.0 - 47.0

8.681 - 8.835

8.500

6.000

4.750

43.5 - 53.5

8.535 - 8.755

8.250

4.750

3.500

6.000

4.750

13-3/8

54.5 - 68.0

12.415 - 12.615

12.250

9.000

8.000



RETRIEVABLE SEAL BORE PACKER - DUAL BORE

Retrievable Seal Bore (RSB) Dual Bore Packer.png


The Retrievable Seal Bore (RSB) Dual Bore Packer delivers high performance with simplicity of design and desirable economics. This packer allows for a larger ID through the packer by sealing in an upper sealbore. This packer is rated for 7,000 PSI and can be equipped to withstand severe corrosion and high temperatures.

NOTE: A retrieving tool is required to retrieve these packers and must be purchased separately.

Special Features

Simple operation

Economical

Easy to retrieve

Easily modified for a wide range of conditions and temperatures


Product Specifications

                 Casing

Recommended Hole Size

(inches)


Tool OD

(inches)

Packer Bore

   (inches)

Upper Seal Bore (inches)

Size

(inches)

Weight (lbs/ft)

4-1/2

9.5 - 13.5

3.920 - 4.090

3.750

2.062

2.688

5

15.0 - 18.0

4.276 - 4.408

4.000

2.688

3.000


5-1/2

13.0 - 20.0

4.778 - 5.044

4.625

3.000

4.000


20.0 - 23.0

4.670 - 4.778

4.500

3.000

4.000


7

17.0 - 26.0

6.276 - 6.538

5.938

4.000

5.250


26.0 - 32.0

6.094 - 6.276

5.875

4.000

5.250

7-5/8

24.0 - 29.7

6.875 - 7.025

6.672

4.000

4.750


RSB RETRIEVING TOOL

RSB Retrieving Tool.png

The RSB Retrieving Tool is used to retrieve RSB Packers. This retrieving tool latches into the top sub with a standard anchor latch to allow the RSB Packer to be retrieved with a straight pull. A spring-loaded collet locates below the support ring that keeps   the packer   locked in a set position.   Latch fingers latch into the packer.   A pull shears the support ring and releases the packer.   If the packer cannot be retrieved normally, this retrieving tool has a safety release that allows it to be disconnected from the packer with right-hand rotation.

Special Features

Simple operation

Safety shear release

Rugged design for multiple use

Product Specifications - Single Bore RSB


Packer Size (inches)

Packer Bore (inches)

Tool OD

(inches)

Tool ID

(inches)

Top Connection

         5

2.688

3.500

1.00

2-3/8 EUE

5-1/2

3.000

3.688

1.25

2-7/8 EUE

6-5/8

3.250

4.250

1.38

2-7/8 EUE

        7

3.000

3.688

1.25

2-7/8 EUE

4.000

5.062

1.75

2-7/8 EUE

9-5/8

6.000

6.980

2.75

4-1/2 EUE

13-3/8

9.000

9.365

5.75

7” LTC


Product Specifications - Dual Bore RSB

Packer Size

(inches)

Packer Bore (inches)

Tool OD

(inches)

Tool ID

(inches)

Top Connection

4-1/2

3.50

0.50

2.688 / 2.062

2-3/8 EUE

       5

3.000 / 2.688

3.688

1.00

2-7/8 EUE

5-1/2

3.000

3.688

1.25

2-7/8 EUE

       7

5.250 / 4.000

5.062

1.75

2-7/8 EUE

7-5/8

4.750 / 4.000

5.810

1.75

2-7/8 EUE


Product Specifications - Hydraulic Set RSB

Packer Size

(inches)

Packer Bore

(inches)

Tool OD

(inches)

Tool ID

(inches)

Top Connection

    5-1/2

3.000

3.688

1.25

2-7/8 EUE

           7

4.000

5.062

1.75

2-7/8 EUE



TYPE KW-IB TANDEM TENSION PACKER

DL-IB Tandem Tension Packer.png

The Type KW-IB Tandem Tension Packer is an economical, compact, low-pressure, tension set, isolation packer used in casing or   perforations and multi-zone injection installations. This packer runs with a tension set packer below. It can be run with the J-pins in the un-jayed position or in the jayed position. In the un- jayed position, applying tension shears   the shear pins   and   allows pack-off.


If run in the jayed position, the KW-IB Tandem Tension Packer must be used in conjunction with an ASI-X Packer. Set down weight shears the pins; left-hand rotation and applied tension will set the tool.


Special Features

Economical

Run in jayed position, or un-jayed position

Optional J-configurations

Product Specifications


        Casing

Recommended Hole Size

(inches)


Tool OD

(inches)


Tool ID

(inches)


Thread Connections

Box Up / Pin Down

Size

(inches)

Weight

(lbs/ft)

3-1/2

7.7 - 10.3

2.922 - 3.068

2.781

1.53

1.900 EUE



4-1/2

9.5 - 11.6

4.000 - 4.090

3.844

1.94

2-3/8 EUE

2.38

2-7/8 EUE

9.5 - 13.5

3.920 - 4.090

3.750

1.50

2-3/8 EUE


1.94

2-3/8 EUE

15.1

3.826

3.650

1.94

2-3/8 EUE


5

15.0 - 18.0

4.276 - 4.408

4.125

1.94

2-3/8 EUE

2.38

2-7/8 EUE

18.0 - 20.8

4.156 - 4.276

4.000

1.94

2-3/8 EUE




5-1/2

13.0 - 15.5

4.950 - 5.044

4.781

2.00

2-3/8 EUE

2.44

2-7/8 EUE

13.0 - 20.0

4.778 - 5.044

4.750

3.00

3-1/2 EUE

15.5 - 20.0

4.778 - 4.950

4.641

2.00

2-3/8 EUE

2.44

2-7/8 EUE

15.5 - 23.0

4.670 - 4.950

4.500

2.00

2-3/8 EUE


7

17.0 - 23.0

6.366 - 6.538

6.125

2.00

2-3/8 EUE

2.44

2-7/8 EUE

17.0 - 26.0

6.276 - 6.538

6.000

3.00

3-1/2 EUE

7-5/8

24.0 - 29.7

6.875 - 7.025

6.672

2.44

2-7/8 EUE

9-5/8

32.3 - 43.5

8.755 - 9.001

8.500

3.00

3-1/2 EUE

43.5 - 53.5

8.535 - 8.755

8.250

2.50

2-7/8 EUE


SET DOWN ISOLATION PACKER

Set Down Isolation Packer.png

The Set Down Isolation Packer is an economical, compact compression set tool used to isolate casing or perforations. It can also be used in multi-zone injection applications. This packer runs above a compression set packer (such as the AS-II Packer or AS-III Packer). Applied compression will shear the shear screws and allow pack-off. Straight pick-up releases the packer.

Special Features

Economical design

Adjustable delayed set

No rotation needed to set or un-set


Product Specifications

Casing

Recommended Hole Size

(inches)


Tool OD

(inches)


Tool ID

(inches)


Thread Connections

Box Up / Pin Down

Size

(inches)

Weight (lbs/ft)

2-7/8

6.5

2.375

2.250

1.50

1.900 NUE / 1.900 EUE

4-1/2

9.5 - 13.5

3.920 - 4.090

3.750

1.94

2-3/8 EUE

     5

11.5 - 20.8

4.156 - 4.560

4.000

1.94

2-3/8 EUE



5-1/2



13.0 - 20.0



4.778 - 5.044



4.625

1.94

2-3/8 EUE

2.50

2-7/8 EUE

3.00

3-1/2 EUE

20.0 - 23.0

4.670 - 4.778

4.500

2.50

2-7/8 EUE



        7



17.0 - 26.0



6.276 - 6.538



6.000

2.00

2-3/8 EUE

2.50

2-7/8 EUE

3.00

3-1/2 EUE

26.0 - 32.0

6.094 - 6.276

5.875

3.00

3-1/2 EUE

7-5/8

33.7 - 39.0

6.625 - 6.765

5.938

2.82

2-7/8 EUE / 4-1/2 LTC

8-5/8

32.0 - 40.0

7.725 - 7.921

7.500

3.00

3-1/2 EUE


9-5/8

32.3 - 47.0

8.681 - 9.001

8.438

3.00

3-1/2 EUE

40.0 - 47.0

8.681 - 8.835

8.438

4.00

4-1/2 EUE


MECHANICAL BALL VALVE

Mechanical Ball Valve.png


The Mechanical Ball Valve is a means for pressure control downhole at the packer. The ball valve provides a seal for pressure aboveor below the valve. This allows for pressure operation to be conducted above a set packer without disturbing formations below.

No tubing plugs need to be run.

Special Features

Holds pressure both directions

Will not open under tubing pressure

Full opening

Non-elastomeric seat seal for repeated opening and closings

Simple collet stinger design

Product Specifications

         Size

       (inches)

Tool OD

(inches)

Tool ID

(inches)

Thread Connections Box Up / Pin Down

4-1/2

5.875

3.25

4-1/2 VAM TOP

5-1/2

8.190

4.30

4-1/2 VAM TOP



Go Top
About
News
Contacts
Tel&Fax: 0086-29-8860 1839
mob/whatsapp/wechat:008618729329559
Email: kingwell@kingwelloilfield.com
Products
Non Magnet
Bridge plug
completion tools
Drilling Equipment
Solid Control
slickline Tools
APR Drill Stem Testing Tools
Cased Hole Logging Equipment
Damping tools
Site Map
Friend Link
中国石油
Tel: +86-29-8860 1839  Email: kingwell@kingwelloilfield.com
Coptright © 2023 Xi'an KINGWELL OILFIELD MACHINERY Co., Ltd. all rights reserved      陕ICP备15008012号